当前课程知识点:Water and Wastewater Treatment Engineering: Physicochemical Technology >  Chapter 6 Ion-exchange >  6-1 Ion-exchange resin >  6-1 Ion-exchange resin

返回《Water and Wastewater Treatment Engineering: Physicochemical Technology》慕课在线视频课程列表

6-1 Ion-exchange resin在线视频

下一节:6-2 Properties of ion-exchange reactions

返回《Water and Wastewater Treatment Engineering: Physicochemical Technology》慕课在线视频列表

6-1 Ion-exchange resin课程教案、知识点、字幕

同学们好!从今天开始我们介绍第6章,离子交换

离子交换法是一种借助于固相离子交换剂上的功能基团中的可交换离子

与水中的离子进行交换反应

以达到离子的置换、分离、去除、浓缩等目的的方法

在给水处理中,离子交换法通常用于软化除盐

由于在工业生产中,通常需要低硬度的软化水和低含盐量的脱盐水

因此,离子交换法作为水软化除盐中最常用的方法之一

在工业用水处理中,占有十分重要的地位

在废水处理中,离子交换法主要用于回收重金属,处理放射性废水等

离子交换法的特点是处理效率高、出水水质好

设备简单、管理方便、应用广泛

水处理中常用的离子交换剂有离子交换树脂、沸石、磺化煤等

目前使用最为广泛的是离子交换树脂

因此,在这一章我们主要介绍应用离子交换树脂的水处理工艺

在第1节中,首先给大家介绍离子交换树脂

我们先来看看离子交换树脂的结构

离子交换树脂一般由树脂母体或称为骨架和活性基团两部分构成

树脂母体是由高分子化合物和交联剂经聚合反应生成的

具有空间网状多孔结构的共聚物

母体的单体材料通常有苯乙烯、丙烯酸、酚醛系列等

活性基团遇水电离成两部分,一部分是固定部分

仍与骨架牢固结合,不能自由移动,称为固定离子

另一部分为活动部分,能在一定空间内自由移动

并可以与周围溶液中的其他同性离子进行交换反应

具有交换性,称为可交换离子

以苯乙烯系树脂为例,如这个反应方程所示

苯乙烯和二乙烯苯交联剂聚合交联得到聚苯乙烯

但这种聚合物没有活性,称为白球

将白球在浓硫酸中加热磺化,聚苯乙烯中苯环上的部分H被置换为磺酸基团

这样就形成了强酸性苯乙烯系阳离子交换树脂

这里的磺酸基团就是活性基团中的固定离子

而电离出的氢离子就是活性基团中的可交换离子

下面介绍离子交换树脂的种类

按照结构特征可以将离子交换树脂分成凝胶型、大孔型、等孔型等

也可以按照树脂母体的单体种类分为苯乙烯系、酚醛系、丙烯酸系等

另外可以按照树脂活性基团的性质分为

强酸和弱酸性、强碱和弱碱性

强酸和弱酸性通常为阳离子交换树脂

强碱和弱碱性通常为阴离子交换树脂

离子交换树脂的全名称包括分类名称、骨架名称以及基本名称

比如最常用的是强酸性苯乙烯系阳离子交换树脂

商用的离子交换树脂都有相应的产品编号

对于凝胶型离子交换树脂,第1位代表分类号,第2位代表骨架号

第3位代表顺序号,最后一位代表交联度数值

对于大孔型离子交换树脂,前面常用D代表大孔型离子交换树脂

下面介绍离子交换树脂的基本性能

从外观来看,离子交换树脂呈不透明或半透明球状颗粒

颜色有乳白色、淡黄色或棕黑色等数种,粒径在0.3-1.2mm

离子交换树脂的密度有两种表示方式,湿真密度和湿视密度

湿真密度是指湿树脂质量和树脂颗粒本身所占体积的比值

主要用于确定树脂床的反冲洗强度、混合树脂床的分层程度

湿视密度是湿树脂质量和树脂堆积体积的比值

主要在离子交换树脂装置设计中用来计算树脂用量

下面给大家介绍离子交换树脂的交换容量

这是树脂最重要的性能指标,它定量地表示了树脂交换能力的大小

交换容量又可以分为全交换容量和工作交换容量

全交换容量是指树脂理论上总的交换能力

等于一定量树脂所具有的可交换离子的总数量

工作交换容量是在给定工作条件下实际上可利用的离子交换能力

只有全交换容量的60-80%左右,与实际运行条件有关

如再生条件、原水含盐量及其组成、水流速度等都会影响树脂的工作交换容量

对于全交换容量,可用采用滴定法测定

或从理论上根据树脂单元结构式进行计算

以强酸性苯乙烯系阳离子交换树脂为例,其分子结构如这个图所示

分子量是184.2,即在184.2g树脂中,含有1g,即1mol的可交换离子

这里的可交换离子是H离子

如果扣去交联剂所占份量8%,全交换容量计算结果为4.99mmol/g

在交换容量的计算中,不论哪种树脂,阳离子如H型、Na型,阴树脂如OH型

可交换离子均为1价离子,而水中被交换离子可以为1价或2价离子

因此,树脂交换容量可定义为树脂所能交换的物质的量n_B

除以树脂体积V或质量m

如果以树脂体积来表示交换容量

可以用q_v=n_B/V这个公式来进行计算

如果以树脂质量来表示交换容量,可以用q_m=n_B/m这个公式来进行计算

基于单位树脂体积的树脂交换容量q_v

和基于单位树脂质量的树脂交换容量q_m可以通过这个式子进行换算

其中B是指可交换离子的基本单位

等于离子式除以电荷数,即一律以当量粒子为基本单元

在这一讲,我们介绍了离子交换树脂及其基本性能

下一讲将介绍离子交换树脂的交换反应特性

Water and Wastewater Treatment Engineering: Physicochemical Technology课程列表:

Chapter 0 Introduction

-0-2 Water treatment process

--0-2 Water treatment process

-0-3 Wastewater treatment process

--0-3 Wastewater treatment process

-Chap 0 Homeworks

Chapter 1 Coagulation and flocculation

-1-1 Introduction

--1-1 Introduction

-1-2 Properties of colloids

-- 1-2 Properties of colloids

-1-3 Mechanisms and process of coagulation and flocculation

--1-3 Mechanisms of coagulation and flocculation

-1-4 Coagulant and coagulant aids

-- 1-4 Coagulant and coagulant aids

-1-5 Kinetics of coagulation and flocculation

--1-5 Kinetics of coagulation and flocculation

--Announcement

-1-6 Factors affecting the coagulation performance

--1-6 Factors affecting the coagulation performance

-1-7 Facilities for coagulation and flocculation

--1-7 Facilities for coagulation and flocculation

-Chapter 1 Homeworks

Chapter 2 Sedimentation and clarification

-2-1 Introduction

--2-1 Introduction

-2-2 Discrete particle settling

--2-2 Discrete particle settling

-2-3 Flocculent settling

--2-3 Flocculent settling

-2-4 Zone settling

--2-4 zone settling

-2-5 Rectangular settling tank

--2-5 Rectangular settling tanks

-2-6 Process calculation of rectangular settling tanks

--2-6 Process calculation of rectangular settling tanks

-2-7 Vertical Flow (up-flow ) and radial flow settling tank

--2-7 Vertical Flow (up-flow ) and radial flow settling tank

-2-8 Plated sedimentation tank

--2-8 Plated sedimentation tank

-2-9 Clarification pool

--2-9 Clarification pool

-3D interactive demonstration for settling tanks

--Method for browser setting

--Up-flow settling tank

--Clarification pool

--Circular settling tank

-Chapter 2 Homework (part 1)

-Chapter 2 Homework (part 2)

Chapter 3 Air floatation

-3-1 Introduction

--3-1 Introduction

-3-2 Theoretical foundation of air floatation

--3-2 Theoretical foundation of air floatation

-3-3 Pressurized dissolved air flotation

--3-3 Pressurized dissolved air flotation

-Chapter 3 Homework

Chapter 4 Filtration

-4-1 Introduction

--4-1 Introduction

-4-2 Structure and process of conventional rapid filter

--4-2 Structure and process of conventional rapid filter

-4-3 Water head loss of filter

--4-3 Water head loss of filter

-4-4 Filtration method of filter

--4-4 Filtration method of filter

-4-5 Filter media

--4-5 Filter media

-4-6 Water distribution system

--4-6 Water distribution system

-4-7 Filter backwashing

--4-7 Filter backwashing

-4-8 Siphon filter

--4-8 Siphon filter

-4-9 Gravity valveless filter

--4-9 Gravity valveless filter

-4-10 Movable hood filter

--4-10 Movable hood filter

-3D interactive demonstration for filtration tanks

--Usage and description for 3-D demonstration

--Method for browser setting

--Conventional rapid filter

--Siphon filter

-Chapter 4 Homework

Chapter 5 Disinfection

-5-1 Introduction

--5-1 Introduction

-5-2 Influence factors of disinfection

--5-2 Influence factors of disinfection

-5-3 Chlorine disinfection

--5-3 Chlorine disinfection

--Correction

-5-4 Chlorine dioxide disinfection

--5-4 Chlorine dioxide disinfection

-5-5 Ultraviolet disinfection

--5-5 Ultraviolet disinfection

-Chapter 5 Homework

Chapter 6 Ion-exchange

-6-1 Ion-exchange resin

--6-1 Ion-exchange resin

-6-2 Properties of ion-exchange reactions

--6-2 Properties of ion-exchange reactions

-6-3 Properties of cation exchange resin

--6-3 Properties of cation exchange resin

-6-4 Properties of anion exchange resin

--6-4 Properties of anion exchange resin

-6-5 Softening system using ion exchange

--6-5 Softening system using ion exchange

-6-6 Desalination system using ion exchange

--6-6 Desalination system using ion exchange

-6-7 Ion-exchange equipment

--6-7 Ion-exchange equipment

-6-8 Treatment of industrial wastewater by ion-exchange method

--6-8 Treatment of industrial wastewater by ion-exchange method

-Chapter 6 Homework

Chapter 7 Membrane separation

-7-1 Introduction

--7-1 Introduction

-7-2 Principle and characteristics of electrodialysis

--7-2 Principle and characteristics of electrodialysis

-7-3 Configuration of electrodialysis unit

--7-3 Configuration of electrodialysis unit

-7-4 Operating parameters for electrodialysis unit

--7-4 Operating parameters for electrodialysis unit

-7-5 Principle and process of reverse osmosis

--7-5 Principle and process of reverse osmosis

-7-6 Operating parameters for reverse osmosis

--7-6 Operating parameters for reverse osmosis

-7-7 Principles and characteristics of UF and MF

--7-7 Principles and characteristics of UF and MF

-7-8 Design of ultrafiltration and microfiltration process

--7-8 Design of ultrafiltration and microfiltration process

-Chapter 7 Homework

Chapter 8 Redox method

-8-1 Fundamental knowledge and classification

--8-1 Fundamental knowledge and classification

-8-2 Ozonation

--8-2 Ozonation

-8-3 Photo-catalytic oxidation

--8-3 Photo-catalytic oxidation

-8-4 Supercritical water oxidation

--8-4 Supercritical water oxidation

-8-5 Electrolysis

--8-5 Electrolysis

-Chapter 8 Homework

Chapter 9 Adsorption

-9-1 Introduction

--9-1 Introduction

-9-2 Adsorption equilibrium and adsorption isotherm

--9-2 Adsorption equilibrium and adsorption isotherm

-9-3 Adsorption breakthrough curve

--9-3 Adsorption breakthrough curve

-Chapter 9 Homework

6-1 Ion-exchange resin笔记与讨论

也许你还感兴趣的课程:

© 柠檬大学-慕课导航 课程版权归原始院校所有,
本网站仅通过互联网进行慕课课程索引,不提供在线课程学习和视频,请同学们点击报名到课程提供网站进行学习。