当前课程知识点:制浆造纸机械与设备 > 第六章 废纸制浆及脱墨机械与设备 > 6.6 废纸制浆流程设计及生产线 > 6.6 废纸制浆流程设计及生产线
同学们好
Hello everyone
今天我们介绍本章的第六节
Today we will introduce chapter 6 section 6
废纸制浆流程设计及生产线
process design and production line of waste paper pulping
我们在前面几节分别介绍了
In the previous sections, we mentioned
废纸制浆的碎浆机、浮选槽
some typical treatment equipments, such as pulping machine
热分散机等典型处理设备
flotation cell and heat dispersion machine for waste paper pulping
在其他章节中也介绍了
In other chapters, we also introduced
通用的净化处理设备
the general purifying treatment equipment
那么接下来,我们就综合上述的内容
Today we are going to introduce the
介绍一下废纸制浆过程中流程设计
process design in waste paper pulping
我们知道废纸作为造纸的原料
We know that waste paper, as the raw material of papermaking
存在原料品质不一
has some problems, such as the quality of raw material is not the same
杂质多样复杂
the various and complex impurity
多种化学品残留等问题
and many kinds of chemicals residue
所以废纸制浆实质上就是
so waste paper pulping is essentially
不断的去除杂质
the process of removing contaminants
不断的净化浆料的过程
and purifying the pulp continuously
并且需要根据不同废纸
and we need to design a specific treatment process
以及所含杂质的特点
according to the characteristics of different waste paper
设计针对性的处理流程
and the contaminants in it
因此其流程比原生浆制浆流程更为复杂
Therefore, the process is more complicated than the original pulping process
废纸浆的制浆处理可以根据
The pulping process of waste pulp
是否脱墨大致分为
can be roughly divided into
脱墨浆处理流程
deinking process and non-deinking process
和非脱墨浆处理流程
according to whether deinking
非脱墨浆指的主要是
Non-deinking pulp refers to
旧瓦楞箱板纸浆
the old corrugated container pulp
也就是OCC浆
also known as OCC pulp
其特点在于所含杂质较为粗大
It is characterized by that the impurity is relatively large
对纤维的表观质量要求不如脱墨浆高
the required apparent quality of the fiber is not as high as the deinking pulp
因此它的流程较为简单
so its process is relatively simple
过去通常采用的基本处理流程为
The basic treatment processes used in the past were
碎浆、除渣、筛选,浓缩
pulping, cleaning, screening and concentration
随着废纸循环利用技术的不断提升
With the continuous improvement of waste paper recycling technology
现阶段也进行了改进
they have also been improved by now
如图中所示
as shown in the figure
碎浆后进行了除渣和筛选
pulping is followed by cleaning
然后是纤维筛分
then the fiber is sifted
将长纤和短纤分开
to separate the long fiber and the short fiber
然后分别处理
and then treated separately
短纤一般简单处理后
the short fiber can be used as the pulp
就可以作为成浆使用
after simple treatment
通常用于瓦楞芯的抄造
usually used for making corrugated container
而长纤则需要进一步净化处理后
and the long fiber needs to go through cleaning treatment
再热分散处理
then the heat dispersion treatment
提高表观质量
to improve the apparent quality
通常用于面层
usually used for the surface layer
这样的话,就可以大材大用,小材小用
In this way, we can use properly the fibers
实现了纤维合理化和经济性的利用
to achieve the fiber rationalization and economic use
这也是近些年来
This also represents the progress of
箱板纸废纸浆技术进步的体现
corrugated container waste pulp technology in recent years
其中纤维筛分仪
Among them, fiber screening equipment
我们在筛选设备中介绍过
that we have introduced in the screening equipment
它是筛分设备的一种
is a screening equipment
不以去除杂质为目的
not to remove contaminants
主要是将不同长短的纤维进行分离
mainly is to separate different lengths of fiber
该设备在OCC浆中的应用
The application of this equipment in OCC pulp
很好的推动了该类废纸制浆技术的提升
has greatly promoted this kind of waste paper pulping technology
接下来继续介绍脱墨浆生产流程的设计
Next, we’ll continue with the design of the production process of deinking pulp
主要包括旧新闻纸生产线
It mainly includes old newsprint production line
和混合办公废纸生产线
and mixed office waste paper production line
虽然这两种废纸的共同特点
Although common characteristic of these two kinds of waste paper
都是含有印刷油墨
is that both contain the printing ink
但是其油墨种类不同
their inks are different
在设计流程时也存在差异
therefore, the process designs are different
首先来看一下旧新闻纸生产线的特点
First let’s look at the features of the old newsprint production line
废纸经过碎浆、除渣和筛选后
Waste paper goes through pulping, cleaning and screening
先是前浮选,然后热分散
pre-floatation, then heat dispersion
继续从纤维上剥离油墨
which continues to remove ink from the fiber
接着再进行后浮选
and then post-floatation
以便进一步去除油墨
in order to further remove ink
对于办公废纸
For office waste paper
由于它的油墨比较特殊
because its ink is special
难以从浆料中去除
and difficult to be removed from the pulp
因此需要考虑浮选、洗涤相结合的方式
so the combination of floatation and washing should be considered
从流程中可以看出
From the process can be seen
浮选之后进行洗涤
washing is performed after the flotation
继续去除油墨
the ink is continued to removed
然后热分散进一步从纤维上剥离油墨
and then is further removed from the fiber by heat dispersion
然后继续脱墨处理
and then continue the deinking treatment
这样的设计主要是针对办公废纸的
This design is mainly set for the characteristics
激光打印油墨的特点而设定的
of office waste paper laser printing ink
以上是废纸制浆流程的简要介绍
The above is a brief introduction to the pulping process of waste paper
至此,我们有关废纸制浆和
So far, our chapter on waste paper pulping
脱墨机械与设备这章的内容就全部结束了
and deinking machinery and equipment is all over
这章的内容比较多
This chapter is more comprehensive
整体性也更强
and the integrity is also stronger
尤其是在当前废纸已成为主要造纸原料
we need to have deep thought on
同时在国家颁布 “禁废令”的形势下
how to meet the challenge
如何迎接挑战
and use waste paper efficiently while studying this chapter
找到废纸高效利用的新方法和新途径
especially in the current situation
都是在学习本章内容时
waste paper has become the main raw material for papermaking
需要进行深入思考的
meanwhile the state issued the "ban on waste"
好,废纸处理设备的内容
Well, that’s all about the
我们就介绍到这里
waste paper processing equipment
谢谢大家
Thank you
-1.1 备料概述
--1.1 备料概述
-1.2 木材备料机械与设备
-1.3 非木片筛及木材备料辅助设备
--讨论
-第一章测试 备料机械与设备
--第一章测试 备料机械与设备
-2.1 化学制浆概述
--讨论
-2.2 间接式蒸煮设备
-2.3 连续式蒸煮设备
-第二章测试 化学制浆机械与设备
--第二章测试 化学制浆机械与设备
-3.1 概述及磨石磨木机
-3.2 盘式磨浆机
--讨论
-3.3 搓丝机
--3.3 搓丝机
-3.4 高得率制浆的附属设备及发展
-第三章测试 高得率制浆机械与设备
--第三章测试 高得率制浆机械与设备
-4.1 概述
--4.1 概述
-4.2 洗涤与浓缩设备
-第四章测试 洗涤浓缩机械与设备
--第四章测试 洗涤浓缩机械与设备
-5.1 概述
--5.1 概述
-5.2 筛选设备
--5.2 筛选设备
-5.3 净化设备
--5.3 净化设备
-第五章测试 筛选净化机械与设备
--第五章测试 筛选净化机械与设备
-6.1 概述
--6.1 概述
-6.2 碎浆机
--6.2 碎浆机
-6.3 浮选槽
--6.3 浮选槽
--讨论
-6.4 热分散机
--6.4 热分散机
-6.5 废纸造纸废水处理设备
-6.6 废纸制浆流程设计及生产线
-第六章测试 废纸制浆及脱墨机械与设备
--第六章测试 废纸制浆及脱墨机械与设备
--讨论
-7.1 纸浆清洁漂白常用流程
-7.2 中浓浆泵、中浓混合器及高浓混合器
-7.3 中浓纸浆氧脱木素塔、二氧化氯漂白塔、过氧化氢漂白塔及碱处理塔
--7.3 中浓纸浆氧脱木素塔、二氧化氯漂白塔、过氧化氢漂白塔及碱处理塔
--讨论
-第七章测试 漂白机械与设备
--第七章测试 漂白机械与设备
-8.1 纸浆在输送管道中的压头损失及浆泵扬程
--讨论
-8.2 纸浆输送机械
--讨论
-8.3 纸浆贮存设备
-第八章测试 纸浆输送及贮存机械与设备
--第八章测试 纸浆输送及贮存机械与设备
-9.1 打浆设备概述
-9.2 打浆机和圆柱形磨浆机
-9.3 锥形磨浆机
-9.4 盘磨机
-9.5 中、高浓盘磨机及疏解设备
-第九章测试 打浆及疏解机械与设备
--第九章测试 打浆及疏解机械与设备
-10.1 造纸机的发展、组成与分类
--实验室小纸机展示
--大国工匠精神
-10.2 造纸机的规格及长网机的配置
-10.3 造纸机的专用名词术语
-第十章测试 造纸机概述
--第十章测试 造纸机概述
-11.1 纸浆流送系统
--讨论
-11.2 纸浆流送系统的相关操作单元及设备
-11.3 流浆箱的概述
-11.4 流浆箱的布浆器
-11.5 堰池、匀整装置和上浆装置
-11.6 稀释型水力式流浆箱
-第十一章测试 纸浆流送设备与流浆箱
--第十一章测试 纸浆流送设备与流浆箱
-12.1 概述
--12.1 概述
-12.2 长网成形装置
--讨论
-12.3 圆网成形装置
-12.4 夹网成形装置
-12.5 复合型成形器、叠网成形器及网部的辅助装置
-第十二章测试 造纸机成形装置
--第十二章测试 造纸机成形装置
-13.1 概述
--13.1 概述
-13.2 双辊压榨
-13.3 压榨部的引纸装置
-13.4 压榨配置方式及复式压榨
--讨论
-第十三章测试 造纸机压榨装置
--第十三章测试 造纸机压榨装置
-14.1 概述
--14.1 概述
-14.2 烘缸、烘毯缸和冷缸
--讨论
-14.3 供热系统
-14.4 强化装置及辅助设备
-第十四章测试 造纸机干燥装置
--第十四章测试 造纸机干燥装置
-15.1 压光机概述
-15.2 压光机的主要部件
-15.3 普通压光机、半干压光机及光泽压光机
-15.4 软辊压光机、超级压光机及卷纸机
-第十五章测试 压光机和卷纸机
--第十五章测试 压光机和卷纸机
-16.1 概述及涂料制备设备
-16.2 涂布器和干燥器
-第十六章测试 涂布机械与设备
--第十六章测试 涂布机械与设备

