当前课程知识点:制浆造纸机械与设备 >  第八章 纸浆输送及贮存机械与设备 >  8.3 纸浆贮存设备 >  8.3 纸浆贮存设备

返回《制浆造纸机械与设备》慕课在线视频课程列表

8.3 纸浆贮存设备在线视频

下一节:9.1 打浆设备概述

返回《制浆造纸机械与设备》慕课在线视频列表

8.3 纸浆贮存设备课程教案、知识点、字幕

同学们好
Hello, class

今天我们继续学习第三节
Today, let’s continue to learn the Section 3

纸浆贮存设备
Pulp Storage Equipment

大家都知道
As we are all aware

蒸煮后的浆料需要经过
the pulp after cooking needs to go through

洗涤、筛选、漂白、打浆等工艺过程
washing, screening, bleaching, beating and other processes

才能进行抄纸
to make paper

而在这些过程中
In these processes

必须设置贮浆池the pulp chest must be provided

而贮浆池必须设置循环搅拌装置
and the pulp chest must be equipped with a circulation stirring device

该章节针对的是中低浓纸浆的贮存
This Chapter focuses on the storage of medium and low consistency pulp

贮浆池除了贮存以外
In addition to storage

还有下面的功能
the pulp chest has the following functions

混合、调节、稳定浆料的作用
The function of mixing, regulating and stabilizing pulp

其作用表现在什么方面
Its functions are shown in the aspects

在贮存过程中
in the storage process

可使浆料互相混合
it can make the pulp mix with each other

达到配比、浓度
achieves the even and consistent about

打浆度、填料
proportion, consistency, beating degree

胶料(颜色)等均匀一致
filler and sizing (color), etc.

在制浆过程中
In the pulping process

可通过中间贮存
the impact of quality fluctuation

可以将质量波动影响降至最低
can be minimized by intermediate storage

中间缓冲作用
Intermediate buffer action

也就是
That is to say

通过贮存足够的浆料
by storing enough slurry

可以不会因一个工段或一台设备
the whole production cannot be affected

出现故障而影响整个生产
due to the failure of one section or one set of equipment

另外可以将连续生产
In addition, continuous production

与间歇生产连接起来
and intermittent production can be connected

达到均衡生产
to achieve balanced production

我们先学习
Let's study first

低浓贮浆池
Low consistency pulp ches

贮浆浓度 ≤6%
The pulp storage consistency is less than 6%

可用于制浆车间
It can be used for storage of pulp in pulping workshop

或造纸车间浆料的贮存
or papermaking workshop

双沟道卧式贮浆池就是其中一种
The double-ditch horizontal slurry chest is one of them

它具有螺旋浆推进器
It has screw propeller

回浆道和出浆道
return channel and discharge channel

低浓贮浆池中还有
There is a vertical square slurry chest

立式方形贮浆池
among the low consistency pulp chest

比卧式浆池大
which is larger than the horizontal slurry chest

浆池底部有8~10°的倾斜度
and has an inclination of 8~10° at the bottom of the slurry chest

浆池下部装有搅拌器
the bottom of the slurry chest is equipped with a mixer

最低处的池壁上
and the lowest part of the wall of the tank

有出浆口和排污口
has a pulp outlet and a sewage outlet

贮浆浓度 ≤ 5%
and the pulp storage consistency is less than 5%

另外还有立式贮浆池(塔)
In addition, there is a vertical slurry chest (tower)

图中为立式的圆柱形贮浆塔
The figure shows a vertical cylindrical slurry tower

优点
Advantages

贮浆能力大
Large storage capacity

占地面积小
small footprint

浆料混合循环良好
good pulp mixing and circulation

在池体下部的切线方向
the propeller is installed in the tangent direction

装有螺旋桨推进器
of the lower part of the tank

池底具有一定的坡度
and the bottom of the tank has a certain slope。

现在我们来看看
Now let's have a look at

中浓贮浆塔
Medium consistency slurry tower

中浓贮浆塔贮浆浓度
The consistency of pulp in medium consistency slurry tower

一般在8~12%范围
is in the scope of 8-12%

根据塔内浆料输出方法分为
Based on the output method of pulp in the tower, it is classified into

低浓泵送的中浓贮浆塔
Low-consistency slurry pumped medium-consistency slurry tower

从图可知
It can be seen from the figure that

在塔体下部外壁
an annular water pipe is installed

安装有环形水管
on the outer wall of the lower part of the tower body

并连接若干个针形阀喷嘴
and a number of needle-shaped valve nozzles are connected

可向池内通入一定压力的稀释水
so that dilution water with a certain pressure can be pumped into the tank

在下部的池壁上切线方向装有推进器
A propeller is arranged in the tangent direction on the lower pool wall

塔内浆料经稀释搅拌均匀后
After the pulp in the tower is diluted and stirred evenly

由低浓浆泵抽出
the pulp is pumped out by a low consistency slurry pump

中浓泵送的贮浆塔
Medium consistency slurry pumping slurry tower

采用中浓浆泵
The pulp can be delieved directly

直接把纸浆送出来
by using medium-consistency slurry pump

为了贮存纸浆
In order to store pulp

除了贮浆塔和贮浆池以外
in addition to the slurry tower and the pulp chest

还需要在贮浆塔和贮浆池中
it is also necessary to set up mixing device

均设置搅拌装置
in the slurry tower and the pulp chest

搅拌装置的型式主要分为下面几种
The types of mixing device are mainlydivided into the following types

螺旋推进器、螺旋桨搅拌器
Screw propeller, propeller agitator

轴流式推进器、涡轮推进器
axial-flow propeller and turbine propeller。

螺旋推进器
Screw propeller

该推进器适用于卧式贮浆池
this propeller is suitable for horizontal slurry chest

适于各种浆料的循环混合
It is applicable for circulating mixing of various pulp

安装在卧式浆池内
which is installed at the end

出浆道的端部
of the pulp outlet channel of the horizontal pulp chest

由于螺旋叶片表面积大
Because of the large surface area of the screw blade

混合效果较好
the mixing effect is better

轴流式推进器
Axial-low propeller

该推进器适于
The propeller is suitable for

各种立式贮浆塔用作循环
various vertical slurry towers for circulating pulp

螺旋桨搅拌器
Propeller agitator

该搅拌器适用于
The agitator is suitable for

方形贮浆池浆料的搅拌和混合
stirring and mixing the pulp in a square pulp chest

与螺旋推进器的区别在于
The difference between it and the screw propeller

螺旋桨叶结构形状
lies in the structure shape of the propeller blade

及螺旋角大小
and the size of the screw angle

涡轮推进器
Turbine propeller

该种推进器适用于卧式贮浆池
This kind of propeller is suitable for horizontal pulp chest

适于细浆的循环搅拌
It is applicable for circulating and stirring of fine pulp

浆料浓度 ≤ 5%
and the pulp consistency is less than 5%

当涡轮旋转时
When the turbine rotates

把浆料从中心吸入
the pulp is sucked from the center

利用旋转产生的离心力
and the slurry is thrown into the outlet channel

使浆料沿涡轮切线方向
along the tangential direction of the turbine

抛入出浆道
by using the centrifugal force

从而使浆料循环流动
generated by the rotation thus the pulp circulates

本章学习到这里就结束了
That's all for this section

谢谢同学们
Thank you

制浆造纸机械与设备课程列表:

第一章 备料机械与设备

-1.1 备料概述

--1.1 备料概述

-1.2 木材备料机械与设备

--1.2.1 木材备料机械与设备 剥皮机

--1.2.2 木材备料机械与设备 削片机

--1.2.3 木片筛及其它辅助设备

-1.3 非木片筛及木材备料辅助设备

--1.3.1 备料方法及干法切断设备

--讨论

--1.3.2 筛选除尘设备及湿法备料设备

-第一章测试 备料机械与设备

--第一章测试 备料机械与设备

第二章 化学制浆机械与设备

-2.1 化学制浆概述

--2.1 化学制浆概述

--讨论

-2.2 间接式蒸煮设备

--2.2.1 间接式蒸煮设备的结构

--2.2.2 新型间歇式蒸煮设备

-2.3 连续式蒸煮设备

--2.3.1 概述及管式连蒸设备

--2.3.2 塔式连蒸设备类型

--2.3.3 塔式连蒸设备结构与辅助设备

-第二章测试 化学制浆机械与设备

--第二章测试 化学制浆机械与设备

第三章 高得率制浆机械与设备

-3.1 概述及磨石磨木机

--3.1 概述及磨石磨木机

-3.2 盘式磨浆机

--3.2.1 盘式磨浆机(上)

--3.2.2 盘式磨浆机(中)

--3.2.3 盘式磨浆机(下)

--讨论

-3.3 搓丝机

--3.3 搓丝机

-3.4 高得率制浆的附属设备及发展

--3.4 高得率制浆的附属设备及发展

-第三章测试 高得率制浆机械与设备

--第三章测试 高得率制浆机械与设备

第四章 洗涤浓缩机械与设备

-4.1 概述

--4.1 概述

-4.2 洗涤与浓缩设备

--4.2 洗涤与浓缩设备

-第四章测试 洗涤浓缩机械与设备

--第四章测试 洗涤浓缩机械与设备

第五章 筛选净化机械与设备

-5.1 概述

--5.1 概述

-5.2 筛选设备

--5.2 筛选设备

-5.3 净化设备

--5.3 净化设备

-第五章测试 筛选净化机械与设备

--第五章测试 筛选净化机械与设备

第六章 废纸制浆及脱墨机械与设备

-6.1 概述

--6.1 概述

-6.2 碎浆机

--6.2 碎浆机

-6.3 浮选槽

--6.3 浮选槽

--讨论

-6.4 热分散机

--6.4 热分散机

-6.5 废纸造纸废水处理设备

--6.5 废纸造纸废水处理设备

-6.6 废纸制浆流程设计及生产线

--6.6 废纸制浆流程设计及生产线

-第六章测试 废纸制浆及脱墨机械与设备

--第六章测试 废纸制浆及脱墨机械与设备

--讨论

第七章 漂白机械与设备

-7.1 纸浆清洁漂白常用流程

--7.1 纸浆清洁漂白常用流程

-7.2 中浓浆泵、中浓混合器及高浓混合器

--7.2 中浓浆泵、中浓混合器及高浓混合器

-7.3 中浓纸浆氧脱木素塔、二氧化氯漂白塔、过氧化氢漂白塔及碱处理塔

--7.3 中浓纸浆氧脱木素塔、二氧化氯漂白塔、过氧化氢漂白塔及碱处理塔

--讨论

-第七章测试 漂白机械与设备

--第七章测试 漂白机械与设备

第八章 纸浆输送及贮存机械与设备

-8.1 纸浆在输送管道中的压头损失及浆泵扬程

--8.1 纸浆在输送管道中的压头损失及浆泵扬程

--讨论

-8.2 纸浆输送机械

--8.2 纸浆输送机械

--讨论

-8.3 纸浆贮存设备

--8.3 纸浆贮存设备

-第八章测试 纸浆输送及贮存机械与设备

--第八章测试 纸浆输送及贮存机械与设备

第九章 打浆及疏解机械与设备

-9.1 打浆设备概述

--9.1 打浆设备概述

-9.2 打浆机和圆柱形磨浆机

--9.2 打浆机和圆柱形磨浆机

-9.3 锥形磨浆机

--9.3 锥形磨浆机

-9.4 盘磨机

--9.4.1 盘磨机(上)

--9.4.2 盘磨机(下)

-9.5 中、高浓盘磨机及疏解设备

--9.5 中、高浓盘磨机及疏解设备

-第九章测试 打浆及疏解机械与设备

--第九章测试 打浆及疏解机械与设备

第十章 造纸机概述

-10.1 造纸机的发展、组成与分类

--10.1 造纸机的发展、组成与分类

--实验室小纸机展示

--大国工匠精神

-10.2 造纸机的规格及长网机的配置

--10.2 造纸机的规格及长网机的配置

-10.3 造纸机的专用名词术语

--10.3 造纸机的专用名词术语

-第十章测试 造纸机概述

--第十章测试 造纸机概述

第十一章 纸浆流送设备与流浆箱

-11.1 纸浆流送系统

--11.1 纸浆流送系统

--讨论

-11.2 纸浆流送系统的相关操作单元及设备

--11.2 纸浆流送系统的相关操作单元及设备

-11.3 流浆箱的概述

--11.3 流浆箱的概述

-11.4 流浆箱的布浆器

--11.4 流浆箱的布浆器

-11.5 堰池、匀整装置和上浆装置

--11.5 堰池、匀整装置和上浆装置

-11.6 稀释型水力式流浆箱

--11.6 稀释型水力式流浆箱

-第十一章测试 纸浆流送设备与流浆箱

--第十一章测试 纸浆流送设备与流浆箱

第十二章 造纸机成形装置

-12.1 概述

--12.1 概述

-12.2 长网成形装置

--12.2.1 长网成形装置(上)

--12.2.2 长网成形装置(下)

--讨论

-12.3 圆网成形装置

--12.3 圆网成形装置

-12.4 夹网成形装置

--12.4 夹网成形装置

-12.5 复合型成形器、叠网成形器及网部的辅助装置

--12.5 复合型成形器、叠网成形器及网部的辅助装置

-第十二章测试 造纸机成形装置

--第十二章测试 造纸机成形装置

第十三章 造纸机压榨装置

-13.1 概述

--13.1 概述

-13.2 双辊压榨

--13.2 双辊压榨

-13.3 压榨部的引纸装置

--13.3 压榨部的引纸装置

-13.4 压榨配置方式及复式压榨

--13.4 压榨配置方式及复式压榨

--讨论

-第十三章测试 造纸机压榨装置

--第十三章测试 造纸机压榨装置

第十四章 造纸机干燥装置

-14.1 概述

--14.1 概述

-14.2 烘缸、烘毯缸和冷缸

--14.2.1 烘缸、烘毯缸和冷缸(上)

--14.2.2 烘缸、烘毯缸和冷缸(下)

--讨论

-14.3 供热系统

--14.3 供热系统

-14.4 强化装置及辅助设备

--14.4 强化装置及辅助设备

-第十四章测试 造纸机干燥装置

--第十四章测试 造纸机干燥装置

第十五章 压光机和卷纸机

-15.1 压光机概述

--15.1 压光机概述

-15.2 压光机的主要部件

--15.2 压光机的主要部件

-15.3 普通压光机、半干压光机及光泽压光机

--15.3 普通压光机、半干压光机及光泽压光机

-15.4 软辊压光机、超级压光机及卷纸机

--15.4 软辊压光机、超级压光机及卷纸机

-第十五章测试 压光机和卷纸机

--第十五章测试 压光机和卷纸机

第十六章 涂布机械与设备

-16.1 概述及涂料制备设备

--16.1 概述及涂料制备设备

-16.2 涂布器和干燥器

--16.2.1 辊式涂布器和气刀涂布器

--16.2.2 刮刀涂布器和干燥器

-第十六章测试 涂布机械与设备

--第十六章测试 涂布机械与设备

8.3 纸浆贮存设备笔记与讨论

收藏文章
表情删除后不可恢复,是否删除
取消
确定
图片正在上传,请稍后...
  • 评分:
评论内容为空!
还没有评论,快来抢沙发吧!

也许你还感兴趣的课程:

© 柠檬大学-慕课导航 课程版权归原始院校所有,
本网站仅通过互联网进行慕课课程索引,不提供在线课程学习和视频,请同学们点击报名到课程提供网站进行学习。
欢迎学习『8.3 纸浆贮存设备慕课视频播放-制浆造纸机械与设备-MOOC慕课视频教程-柠檬大学』